Description
DAEnetIP1 is autonomic network device (IP controller), supporting 10/100 Mb/s Ethernet interface with 12 (8+4) digital outputs, 8 digital inputs/outputs and 8 analog inputs. Just connect the device into your local network and control electrical devices or monitor sensors from another computer or mobile device via Internet. We provide large number of software applications and for developers there are lot of source code examples in Java, .NET, Lab-view, PHP. It can be used successfully for home automation, industrial, sensor monitoring, controlling relay boards or embedding in larger systems.
DAEnetIP1 features
- 10/100 Full duplex Ethernet interface (Auto MDIX)
- Power supply 12VDC / 200 mA
- 8 x analog inputs with 10 bit resolution (0-2.5VDC) with pull-down resistors
- 8 + 4 digital outputs (0-3.3VDC)
- 8 x configurable digital I/O port (0-3.3VDC)
- Hardware “Pulse” function for the digital outputs
- Stand-art protocols: ARP, IP, ICMP (ping), DHCP
- Supports snmp v1 (snmpset, snmpget, snmptrap), HTTP (web server with authorization) , TFTP (for firmware upgrade)
- Port for SNMP (161) can be changed
- It can be configured with SNMP requests or web browser
- Integrated WEB server for all functions/parameters access
- Reset of the digital outputs on incoming/outgoing ping timeout
- Function “load outputs states from EEPROM on boot”
- Each I/O line can be named by user via web browser/snmp
- It can send traps according analog ADC level
- An analog input may be referred to control a digital output according its input level
- On-board temperature sensor
- Possibility of connection analog sensors to the analog inputs as LM34DZ, LM35DZ, LM335, MCP9700A
- PCB size: 85mm x 44mm
Application examples
- Home Automation
- Security and fire alarm systems
- Manual or automatic device restart if event occur
- Management/monitoring for industrial
- Sensor information processing
- Remote electrical devices control (via relay boards)
- Remote Lock/unlock doors
- Suitable for school and university education
IO Ports and leds
- JP1 – 8 x digital output port
- JP2 – 8 x digital I/O port
- JP3 – 4 x digital output port (on the image bellow it is named “Relay Board”)
- JP4 – 8 x ADC inputs
- J1 – not iser defined
- RJ-45 – UTP cable connector
- Power jack – power connector
- Power led – Power 12V DC ready
- Link led – Ethernet activity LED.
- Voltage control led – Power 3.3V DC ready
Power supply requirements
- 12VDC /500mA – center positive tip.
- DAEnetIP1 does not have reverse polarity protection.
- We recommend to use this 12VDC Power Supply Adaptor (SYS1357-241) that may be found also in our store. Please contact with us if you have questions. We sell the adaptor with one of the AC plugs for: USA, UK, EU, AUS. It is sold separately !
