Description
This is Internet/Ethernet 8 channel SPDT relay module (board) for remote management and control with Virtual Serial Port, TCP/IP, Web, HTTP API, Telnet and serial commands access. It has 8 SPDT Relays, 8 digital inputs, 8 analog inputs and one UART port. Inputs can be adjusted to control relays (standalone work). Also inputs of one controller can control outputs of another over the LAN/WAN (box-to-box mode). It can send E-mails on inputs change as well. Suitable for remote control, home automation, data acquisition, sensor processing, alarm systems, PLC applications. Now with FREE Android and iOS App!
Specifications
- 10/100 Mbit Ethernet interface with Link Led. Auto MDIX
- UART interface for RS232/RS485 serial connection with other such controllers. UART can be used also for configuration of the parameters
- Power supply voltage, select-able during purchase:
- 12VDC
- 24VDC
- Power supply consumption (max): 400mA / 12VDC (about 240mA / 24VDC)
- 8 SPDT relay channels (the type depends on the stocks quantity in our store):
- TONGLING – JQC-3FF-S-Z (10A / 250VAC, 15A / 120VAC, 10A / 28VDC)
- SUNHOLD – RAS xx15 (10A / 250VAC, 15A / 120VAC, 15A / 24VDC)
- 1 x 8 digital inputs. Levels: 0 – 3.3VDC
- 1 x 8 analog inputs (0 – 2.048VDC input range). Referent voltage: 2.048 V, resolution: 10 bits
- On boot the outputs are set with states before reset
- Built in RTC (Real Time Clock). It can be synchronized via NTP manually or automatically each 6 hours
- Capacitor power backup keeps time for days during power failure
- Virtual Serial Port – it may be accessed with Serial RS232 commands over TCP/IP network
- Integrated WEB server with password and features like Ajax parameters reading
- Telnet commands
- HTTP API commands
- TCP/IP ASCII protocol with optional RC4 encryption
- All the network ports can be defined by the user
- Supports ICMP (ping)
- 19 modes for I/O lines such as inverting, timer, pulses, setting output via input and switch ON/OFF according particular time (scheduling)
- Any input may be referred to control any output of this or another controller in the TCP/IP network
- Linearization for the analog inputs
- Box-to-Box (distributed) mode
- SMTP with authentication (SSL is not supported)
- E-mail notifications for various events
- IP address protection
- Power and status led
- Third parity software (Android software by iSwitch LLC, Majordomotic, MyDomoticaHd, openHAB)
After purchase you will receive
- 1 x DAEnetIP3 – ET Ethernet controller
- 1 x 8 Output Channel Relay Board
- 1 x Flat ribbon labeled cable
- 3 x plastic spacers
Application examples
- Remote electrical devices control
- Sensor information processing (temperature, humidity, distance…)
- Management/monitoring for industrial
- It may be used for simple standalone web based thermostat
- Remote Lock/unlock doors
- Home automation
- Alarm applications
- Standalone PLC applications
- Controlling another such device over the LAN/WAN without PC (Box-To-Box)
Power Supply
Please pay attention that:
-
The middle pin of the power jack is +12VDC
-
There is not protection against reverse voltage.
-
We recommend to use power supply adaptor that outputs 12 VDC stabilized.
-
In-proper power supply voltage will damage the device!
