USB 4 Relay module – thermoregulator with sensor TCN75A

USB relay board with four channels and connected TCN75A temperature sensor to it.. The relays can handle up to 7A(10A) at 220VAC/120VAC and the sensor can measure temperature from -40 C up to +100 C with accuracy +-0.5 C (typical) and +- 3 C (max). The software we provide makes this USB relay card ideal for applications like temperature monitoring (USB thermometer), temperature loging or simple USB thermoregulator.

Description

USB relay board with four channels and connected TCN75A temperature sensor to it.. The relays can handle up to 7A(10A) at 220VAC/120VAC and the sensor can measure temperature from -40 C up to +100 C with accuracy +-0.5 C (typical) and +- 3 C (max). The software we provide makes this USB relay card ideal for applications like temperature monitoring (USB thermometer), temperature loging or simple USB thermoregulator.

Features

  • Based on our device: USB Four(4) Channel Relay Module. (with difference that is it has attached TCN75A sensor)
  • 4 SPDT Relay channels – select-able by user:
  • JQC-3FC/T73 DC5V (7A / 250VAC, 10A / 125VAC, 12A / 120VAC, 10A / 28VDC)
  • RAS-05-15 (10A / 250VAC, 15A / 120VAC, 15A / 24VDC)
  • PCB parameters: FR4 / 1.5mm / two layers / metalized holes / HAL / white stamp / solder
  • mask / еxtra PCB openings for better voltage isolation / doubled high voltage tracks
  • Sensor temperature range: -40°C up to +100°C with accuracy +-0.5°C (typical) and +- 3°C (max)
  • Sensor cable: ~2 meters
  • Power supply: fully supplied from USB port
  • Current consumption: 400 mA
  • Chip-set: FT245RL. Datasheet – here. Drivers – here
  • Power led: Yes
  • Relay leds: Yes
  • PCB size: 77mm x 56mm x 17mm
  • Software page: here

The sensor

Please note the attached TCN75A sensor is not designed as a probe but it is PCB only with IDC connector. It is not sealed. It is strongly recommend to use it in dry environment. Do not use it for temperature measurements for water or other liquids!