Nikhan Controls > Legacy products > Web SNMP controlled 8 Relay Board v1

Web SNMP controlled 8 Relay Board v1

Web SNMP controlled 8 Relay Board v2

Set of IP SNMP controller and Eight channel Relay board. The system may be controlled by WEB browser, windows application, Android software and SNMP commands.

This is set of DAEnetIP1 and Relay card with 8 relays. The relays may be JQC-3FC/T73 or RAS-12-15 (depending on your choice). It is autonomic Ethernet device. Just connect the board into your local network or internet and control it from remote PC. You may use special software (DAEnetIP1 manager – available for download at this page) or web browser to switch ON/OFF each relay. The relay card is connected to JP1 of DAEnetIP1. You are free to use the rest of DAEnetIP1 ports for your needs. For full description see the DAEnetIP1 manual. For suitable power adaptor please look at our store or contact with us (if you have questions for the power supply source).

Category:

Description

Set of IP SNMP controller and Eight channel Relay board. The system may be controlled by WEB browser, windows application, Android software and SNMP commands.

General description

This is set of DAEnetIP1 and Relay card with 8 relays. The relays may be JQC-3FC/T73 or RAS-12-15 (depending on your choice). It is autonomic Ethernet device. Just connect the board into your local network or internet and control it from remote PC. You may use special software (DAEnetIP1 manager – available for download at this page) or web browser to switch ON/OFF each relay. The relay card is connected to JP1 of DAEnetIP1. You are free to use the rest of DAEnetIP1 ports for your needs. For full description see the DAEnetIP1 manual. For suitable power adaptor please look at our store or contact with us (if you have questions for the power supply source).

Features

  • SNMP v1 protocol
  • SNMPTRAP, SNMPGET, SNMPSET
  • Integrated web server – access via web browser
  • 8 SPDT relays RAS-12-15 or JQC-3FC/T73
  • 12V DC power supply
  • Integrated over-voltage protection
  • Supported by DRM Software (Windows/Linux)
  • Configuration utility – DAEnetIP1 Manager
  • Command line utility
  • Android Software for mobile devices

Application examples

  • Security and fire alarm systems
  • Manual or automatic device restart if event occur
  • Management/monitoring for industrial
  • Sensor information processing
  • Remote electrical devices control
  • Remote Lock/unlock doors
  • Suitable for school and university education
  • 1 x DAEnetIP1 Ethernet controller
  • 1 x Eight Channel Relay board
  • Flat ribbon labeled cable
  • DAEnetIP1 Manager
  • DRM software

Eight channel relay Board

  • Power supply – 12VDC, 300mA
  • 8 SPDT relays – JQC-3F/T73 or RAS-1215. (Depending on your choice)
  • MAX. SWITCHING CURRENT PER SINGLE RELAY CHANNEL:
    • Relay JQC-3F/T73
      • 7A / 250VAC
      • 10A / 125VAC
      • 12A / 120VAC
      • 10A / 28VDC
    • Relay RAS-1215
      • 10A / 250VAC
      • 15A / 120VAC
      • 15A / 24VDC
  • Contact type: Normal Opened (NO), Normal Closed (NC)
  • PCB parameters : FR4 / 1.5mm / two layers / metallized holes / HAL / white stamp / solder mask
  • Extra PCB openings for better voltage isolation
  • Doubled high current tracks
  • Input voltage: 3V-15V (1.5mA max) must be given to the “In” to switch the relay ON
  • May be controlled directly by micro-controller TTL logic
  • Green leds for relay status
  • Red led for power
  • Dimensions: 85mm / 150mm / 20mm
  • Mounting holes diameter: 3mm

Related products